My Cart

Tube Heater 4.5kW 380V - HT G2x1450

Expected to ship in 15 days

Suitable for IPSEN High / low temperature Tempering Furnaces (D/DL types) for fast and controllable hot zone heating.

Compatible Brand:-IPSEN

Compatible IPSEN part #:-S-401693

Compatible Equipment Type and Size: D-5#|8#|13#

Packing type & Packing Qty: Wooden-box

Order & Stock Unit: PC

Minimum Order Quantity: 1 PC

More detailed information can be found in Description section below. 

This Tube Electrical Heater is compatible with IPSEN Tempering furnaces (D/DC type)] for the heating of Hot zone, using Cr20Ni80 heating wire, can be fixed to equipments with2 inch or 2.5 inch threads.


Basic Information of the Product:

  • Diameter:   2 inch
  • Rated Power:    4.5 kW
  • Rated Voltage:   380V
  • Working temperature:   750°C
  • Cold segment protetion: Insulation protected
  • Insulation material:   Refrectory Fiber Blanket
  • Length:      1450mm
  • Hot Segment Length:  1170mm


Compatible with IPSEN High Temperature Tempering Furnaces D/DC Type, furnace load sizes L X W X H, in mm

  • D/DC - 5, Load size: 910 X 610 X 610, load weight: 500 kg
  • D/DC - 8, Load size: 1220 X 760 X 610, load weight: 1000 kg
  • D/DC - 13, Load size: 1220 X 910 X 760, load weight: 1200 kg


RELIABILITY:the tube heater uses Cr20Ni80 heating wire, working temperature can go up to 750 °C and is applicable for multiple working media, for High temperature applications, the heating wires are treated with pre-oxydation process, thus is more reliable than other tube heaters..

EASY TO USE:For high temperature tempering furnaces, tube heaters are easier to use than squirel cage heaters for that they don't need radiation tubes, are thread fitting and, with its relatively lower power per heater, are able to provide better temperature control precisions.

TRACEABILITY:With the serial numbers marked on each of our heaters, we can trace back to historical production records throughout warranty period and improve in case we discover issues in the field. 


We provide Two Year warranty for the product, under following conditions:

  • If the Heaters are short circuited

following conditions should be met to allow warranty to be granted :

  • regular inspection and maintenance should be done properly during usage
  • the furnace is used within its designed range 


  • SAME DAY SHIPPING: The product can be shipped on the same day if the following conditions are fulfilled: it is in stock, the order is paid before 14:00 and express shipping is selected. Otherwise the order will be shipped next work day after the order is received and paid.
  • PACKING: the Heaters are packed with foaming materials to prevent from damage during transportation, then packed in wooden boxes. If quantity is smaller than 3 pieces, extra packing cost will be charged.
  • IDENTIFICATION: Each of Nesdra tube Heater carries a 11 digit serial number on it, with which the heater can be identified and production process records can be traced at any time


This product is subjected to our 30 day return policy. If you have purchased the product and realize that you do not need it or you purchased wrong size, then you may apply for returning it back to us within thirty days after purchase*.

The conditions for return are that the product is not used, not damaged, is still inside original unbroken package and therefore can still be re-sold.

*NESDRA will refund the value of the product as a credit on your account with us. You may use this store credit to purchase any other product in our online shop. No cash withdrawal is possible.

More Information
Gross Weight (kg) 6.050000
Compatible Part Number S-401693
Equipment Type High Temperature Temper
Equipment Load Size 5#, 8#, 13#
Diameter (mm) 2 inch, DN50
Power or Capacity 4.5
Working Temperature (°C) 750
Length of Work Segment (mm) 1450
Return period 30 days
Write Your Own Review
You're reviewing:Tube Heater 4.5kW 380V - HT G2x1450
Your Rating